Felling Trailers to Exhibit FT-10 DDPT Trailer at ARA Show

Felling Trailers Inc. plans to exhibit the FT-10 DDPT Drop Deck Pan Tilt Trailer at The ARA Show 2026, taking place March 2 to 4 in Orlando, Florida.

The FT-10 DDPT is designed to support the loading and transport of low-clearance equipment commonly used in construction, landscaping and rental applications. The trailer uses a gravity-based tilt system to provide a lower approach angle without the use of ramps.

Specifications include a 12-foot deck length, 79-inch width between wheelwells and a 21-foot overall length. The four-foot dovetail and 18-inch approach plate help reduce loading difficulty, with published load angles between seven and 13 degrees.

The trailer incorporates a center pivot tilt system with a locking mechanism aimed at straightforward operation. Fabricated steel pan sides measure 10 inches high, and an optional steel floor plate is available. Tie-down options include multiple D-rings and corner points, along with an optional lockable toolbox for securing chains and straps.

Running gear consists of two 6,000-pound axles with spring suspension and forward self-adjusting electric brakes. The trailer has a GVWR of 9,980 pounds and a payload capacity listed at 7,380 pounds, along with an adjustable 2-5/16-inch coupler.

The FT-10 DDPT will be displayed in Booth 5232 during the show.